Free Shipping included to the lower 48 states.

A breakthrough in hand drying technology, the XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and the result is the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:

8 second drying time*
Uses 80% Less Energy than other hand dryers
95% Cost Savings vs. Paper Towels
GreenSpec® Listed and Helps Qualify for LEED® Credits
Promotes Hygiene (automatic sensor activated)
Source Reduction Alternative
Conventional hand dryers take from 30 to 45 seconds to get a user’s hands totally dry. With the automatic sensor-activated XLERATOR, not only do your hands get dry in 8 to 15 seconds. Not only does the XLERATOR dry hands in one third of the time required by conventional hand dryers, the hand-drying system is designed to run on 15-amp service (making it great for older buildings). The combination of these two factors results in 80% less energy cost per use vs.conventional hand dryers.

FEATURES

Adjustable Speed & Sound
Adjustable Heat Settings — High, Medium, Low And Off
Multi Voltage: 110-120V, 208-277V, 230V
Externally Visible Service LED
7-Year Limited Waranty
1.1 Quieter Nozzle
Maintenance Free
Made in USA

RECESS KIT (optional)
Dimensions: 11 3/4" lg. X 12 11/16" high x 6 11/16" deep
(298 mm lg. X 322 mm high x 170 mm deep)
Weight: XL-BW - 15 lbs. (6.80 kgs.) XL-SB 16 lbs. (7.26 kgs.)
XL-W, XL-GR, XL-C, XL-SI - 17 lbs. (7.71 kgs.)
Dimensions: 16 3/8” wide x 26” high x 3 3/8” deep
(416 mm wide x 660 mm high x 86 mm deep)
Weight: 11 lbs. (4.99 kgs.)
Note: Bottom of recessed wall box should be 10" (254 mm) below suggested mounting height for dryer (see chart).

DIMENSIONS

Dimensions: 11 3/4" lg. X 12 11/16" high x 6 11/16" deep
(298 mm lg. X 322 mm high x 170 mm deep)
Weight: XL-BW - 15 lbs. (6.80 kgs.) XL-SB 16 lbs. (7.26 kgs.)
XL-W, XL-GR, XL-C, XL-SI - 17 lbs. (7.71 kgs.) 

CONSTRUCTION

Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.
Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.
All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
Entire mechanism shall be internally grounded.

MECHANISM

Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).
Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).
Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.

LIMITED WARRANTY

XLERATOR and XLERATOReco Hand Dryers now have a 50% longer life which is attributed to a new curved brush motor. All dryers are warrantied to be free of manufacturing defects for 7-years which covers all parts including the motor and sensor. 

QUANTITY RECOMMENDATIONS

One dryer for every two washbasins is sufficient for most applications. If restroom
traffic is unusually heavy, we suggest one dryer per washbasin in small installations
and two dryers for every three washbasins in larger installations. When a 54"
washfountain is used, we suggest four to five dryers.

Dry Times and Energy Usage

* See manufacturer's website for testing methodologies.